|
Hydraulic Universal Cylindrical Grinding Machine Models Available
- Cylindrical (External)
- PUI-250, PUI-300, PUI-450, PUI-600, PUI-800, PUI-1000, PUI-1250, PUI-1500, PUI-2000 & PUI-2500.
- Internal (Bore)
- PUI-300, PUI-450 & PUI-600.
- Centerless PUI-50 & PUI-80
SPECEFICATIONS PUI 1000 GENERAL: MAXIMUM DISTANCE BETWEEN CENTER mm 1000 MAXIMUM DIAMETER OF SWING mm 299 MAXIMUM GRINDING DIAMETER mm 125 TABLE: HYD INFINITELY VARIABLE RANGE OF TABLE FEEDS PER MINUTE mm 0.5/1.5 m/min MAXIMUM SWIVEL OF TABLE deg 7’+3’ 10’ ELECTRIC MOTOR 3 PHASE/1440 RPM 400/440 VOLT K.W/H.P 0.37/0.5 WHEEL HEAD: GRINDING WHEEL (D X W X B) mm 355 X 38.1X 127 WORN OUT DIAMETER mm 275 GRINDING WHEEL SPINDLE RPM RPM 1800 *SWIVEL OF WHEEL HEAD (TOWARDS WORK HEAD & TAIL STOCK) deg. 60’- 45’ ELECTRIC MOTOR 3 PHASE/1440 RPM 400/440 VOLT K.W./H.P 2.2/3 MAXIMUM TRAVERSE MOVEMENT mm 150 INFEED PER ONE DIVISION OF HAND WHEEL/ PER DIVISION mm 0.01 WORK HEAD: NUMBER OF SPINDLE SPEED 4 RANGE OF SPINDLE SPEED RPM 65/125/175/300 MORSE TAPER IN SPINDLE MT 4 WORK HEAD SWIVEL deg 90’ ELECTRIC MOTOR 3 PHASE/1440 RPM 400/440 VOLT K.W/H.P 0.37/0.5 COOLANT PUMP MOTOR 3 PHASE 2860 RPM /400-440 VOLT K.W/H.P 0.11/0.15 TAIL STOCK: MORSE TAPER IN SPINDLE MT 4 QUILL TRAVEL mm 25 WEIGHT AND DIMENSION: WEIGHT (APPROXIMATE) KG 3000 LENGTH mm 2300 WIDTH mm 1300 HEIGHT mm 1550 *INTERNAL GRINDING ATTACHMENT: (EXTRA EQUIPMENT AT EXTRA COST) SPINDLE DIAMETER ( 60X250) mm 60 MAXIMUM INTERNAL GRINDING DEPTH mm 90 MINIMUM MAXIMUM DIAMETER OF HOLE GRINDING mm 18-100 MINIMUM MAXIMUM DIAMETER OF GRINDING WHEEL mm 14-40 SPINDLE QUILLSPEED RPM 12000 ELECTRIC MOTOR 3 PHASE/2800 RPM 400-440 VOLT K.W/H.P 0.37/0.5 NOTE : - all weight & dimentions are approximate & are not binding as constantly improving design. .
|
